Kyocera TASKalfa 3050ci Service Manual page 388

Code Contents
9130 Sensor error in coin vender
change (Yen 50)
Change is empty despite
change is enough.
9140 Sensor error in coin vender
change (Yen 100)
Change is empty despite
change is enough.
9150 Sensor error in coin vender
change (Yen 500)
Change is empty despite
change is enough.
9160 Coin vender pay-out error
Coin is paid out despite the
pay-out motor is determined
not active.
9170 Coin vender pay-out sensor
error
Coin is paid out despite the
pay-out motor is determined
not active.
9500
9510
9520
9530
9540
9550
Causes
Coin jam in the Check visually and remedy.
change tube
Poor contact in the Check if the change empty sensor is intact.
connector.
Defective change Replace the coin mec.
empty sensor.
Defective coin Replace the coin mec.
vender control
PWB.
Coin jam in the Check visually and remedy.
change tube
Poor contact in the Check if the change empty sensor is intact.
connector.
Defective change Replace the coin mec.
empty sensor.
Defective coin Replace the coin mec.
vender control
PWB.
Coin jam in the Check visually and remedy.
change tube
Poor contact in the Check if the change empty sensor is intact.
connector.
Defective change Replace the coin mec.
empty sensor.
Defective coin Replace the coin mec.
vender control
PWB.
Defective pay-out Replace the coin mec.
motor.
Change jam at the Check visually and remedy.
pay-out.
Defective pay-out Replace the coin mec.
motor.
Defective pay-out Replace the coin mec.
sensor.
Contact the Service Administrative Division.
Contact the Service Administrative Division.
Contact the Service Administrative Division.
Contact the Service Administrative Division.
Contact the Service Administrative Division.
Contact the Service Administrative Division.
1-4-90
2LK/2LN/2LM/2LC-2
Check procedures/
corrective measures