Kyocera TASKalfa 3050ci Service Manual page 450

8. Press [Chart] and [Print] to print a chart.
9. Verify that each scale is within the
range of 1to A. If they are within the
range, proceed to step 10.
If scales are out of range, repeat steps
6 through 9.
10. Verify that scales of MV-1,2,4,5/CV-
1,2,4,5/YV-1,2,4,5 coincide within the
range of 1 to A.
If they are within the range, adjustment
is complete.
If they are out of range, proceed to step
11.
If manual color registration has failed:
11. If the balance between V-1 and V-5 is
more than 2 scales (sample 1) or less
than -2
scales (sample 2), perform the following
steps:
Sample 1
V-1 V-2 V-3 V-4 V-5
Figure 1-5-55
The scale must be corresponding
within the range of "A" from "1".
Figure 1-5-53
Chart for adjustment
Figure 1-5-54
Sample 2
V-1 V-2
1-5-32
2LK/2LN/2LM/2LC
V-3 V-4 V-5