Kyocera TASKalfa 3050ci Service Manual page 276

Item No.
U468 Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U469 Adjusting the color registration
Description
Performs the color registration correction and transfer belt speed correction.
Purpose
To perform when replacing the maintenance kit or laser scanner unit.
Method
1. Press the start key.
2. Select the item.
Display
Auto
Manual
Belt Initialize
Method: [Auto]
1. Select [Print].
2. Press the start key. A chart for adjustment is outputted.
3. Set the output chart for adjustment as the original.
4. Select [Execute].
5. Press the start key. Color registration correction starts.
6. When normally completed, [OK] is displayed.
If a problem occurs during auto adjustment, error code is displayed.
Description
Executing the auto color registration correction
Executing the manual color registration correction
Executing the transfer belt speed correction
Chart for adjustment
Figure 1-3-33
1-3-182
Description
2LK/2LN/2LM/2LC