Specifications Of Servo Drive (Asda-M Series) - Delta ASDA-M Series User Manual

11.1 Specifications of Servo Drive (ASDA-M Series)

ASD-M Series
Phase／Voltage
Permissible voltage
Input Current (3PH)
Input Current (1PH)
Continuous output current
(Arms)
Cooling method
Encoder resolution
／Feedback resolution
Main circuit control
Control mode
Regenerative Resistor
Max. input pulse frequency
Pulse type
Command source
Smoothing strategy
E-gear ratio
Torque limit
Feed forward compensation
0 ~ ±10 V
Speed control range
Command source
Smoothing strategy
Torque limit
Bandwidth
Speed accuracy
Revision December, 2014
Chapter 11 Specifications
Single phase / Three phase: 200 ~ 230 VAC, -15%~10%
(Arms)
(Arms)
Transmitted by differential: 500K/4Mpps, transmitted by
Pulse + symbol； A phase + B phase; CCW pulse + CW pulse
E-gear ratio: N／M time, limitation: (1/50 < N/M < 25600)
DC
10 K
2.2 us
*1
*2
The ambient temperature fluctuation (0 ~ 50℃) is 0.01%
750W
07
Three phase or single phase 220 VAC
9.3
17.8
5.1
Fan cooling
20-bit (1280000 p/rev)
SVPWM Control
Manual／Auto
Built-in
open-collector: 200Kpps
External pulse／Register
Low-pass and P-curve filter
N: 1~32767／M: 1:32767
Parameter settings
Parameter settings
0 ~ ±10 V
10 K
2.2 us
1:5000
External analog command / Register
Low-pass and S-curve filter
Via parameter setting or analog input
Max. 1kHz
The load fluctuation (0 ~ 100%) is 0.01%
The power fluctuation (±10%) is 0.01%
1.5KW
15
18.6
33.3
8.3
DC
11-1