Canon imageRUNNER ADVANCE C5560i III User Manual page 1306

Scanning was canceled because the originals were not correctly fed.
A paper jam occurred in the feeder because multiple originals were fed together.
● Remove the originals from the feeder, and place them again.
A paper jam occurred in the feeder because an invalid type of original was fed.
● Remove the invalid original (
Remove the jammed originals from the feeder and any originals left in the feeder tray,
then place them back in the feeder tray and press the [Start] key.
Scanning was canceled because the original is jammed in the feeder.
● You need to restart the scanning with the sheet jammed in the feeder. Put together the unscanned sheets
of original neatly, reload them in the feeder, and then press
Remove the original from the feeder.
You are using a function that cannot be used when an original is placed in the feeder.
● Place the original on the platen glass.
The alignment function of the finisher needs to be checked. Contact your service
representative. Printing is still possible.
The paper alignment function of the finisher is broken.
● Restart the machine. If the message is still displayed after restarting the machine, make a note of the
message and contact your local authorized Canon dealer.
● Output the paper to a tray with a working paper alignment function.
<Output Tray Settings>(P. 1077)
The finisher output trays cannot move up or down.
The output tray of the finisher is not operational.
● Remove any objects that may be obstructing the operation of the output tray.
● Restart the machine. If the message does not disappear after restarting the machine, write down the
message displayed and contact your local authorized Canon dealer.
The front cover of the finisher is open.
The front cover of the finisher is open.
● Check whether the front cover of the staple finisher/booklet finisher is closed.
Cannot register any more forms.
The maximum number of registered image forms for the Superimpose Image mode has been reached.
● Delete any unnecessary image forms and try registering again.
Troubleshooting
Placing Originals(P. 109) ), and place an appropriate type of original.
1292
.