●
The test page refers to a sheet of paper with four color stripes printed, which you use in the following
steps.
5
Place the test page on the platen glass.
●
Place the test page sheet in the machine in a manner that its side on which the four color stripes are printed
faces down and the black stripe faces toward the back side of the machine.
6
Close the feeder and press <Start Scanning>.
➠
The machine starts scanning the test page.
7
Open the feeder, and remove the test page.
8
Repeat steps 4 to 7.
●
To complete the adjustment, print the test page four times, and scan it each time it is printed.
Quick Adjustment
This adjustment maintains the optimized status that was acquired by <Full Adjust>. If the result of this adjustment is
not satisfactory, perform <Full Adjust>.
1
Press
<Adjustment/Maintenance>
Gradation>.
2
Select the paper to adjust, and press <Quick Adjust>.
●
If you selected <Simple> in <Adjustment Level>, it is not necessary to select the paper. Adjustment is
applied to all paper types.
3
Press <Start>.
Changing the Settings for Adjustment
You can change the paper and adjustment level to use when performing adjustment.
Maintenance
<Adjust Image Quality>
1201
<Auto Adjust