Canon imageRUNNER ADVANCE C5560i III User Manual page 1125

<Receive/Forward>
This section describes how to specify receive settings.
<TX/RX User Data List>
<Function Settings>
You can print a list of the send/receive settings registered in the machine.
<Fax User Data List>
<Function Settings>
You can print a list of the fax settings registered in the machine.
<Print on Both Sides>
<Function Settings>
You can select whether to print received documents on both sides of paper.
<Select Drawer>
<Function Settings>
You can set how the machine prints documents when there is no paper matching the size of the received
document. There are four printing methods.
● <Switch A>
The image is printed over two sheets of paper that have the same combined size as the received
document.
● <Switch B>
The image is printed with blank space on paper that has the same width as the received document.
● <Switch C>
The image is reduced and printed on paper that differs in width from the received document.
● <Switch D>
The image is printed on paper that is larger in size than the received document.
<Reduce Fax RX Size>
<Function Settings>
You can select whether to reduce received documents so that the whole document is printed within the
printable area of the paper.
● If this setting is set to <Off>, the image size of the received file is not reduced to fit the size of the
paper. If the size of the image exceeds the printable area, the image is divided into equal sections and
printed onto separate sheets of paper.
● If you select <Auto> in <Reduction Mode>, the image size is automatically reduced by a suitable
reduction ratio. This ratio can range from the value set for <Reduction %>, up to 100% of the received
document size.
Settings/Registration
<Receive/Forward> <Output Report>
<Receive/Forward> <Output Report>
<Receive/Forward> <Common Settings>
<Receive/Forward> <Common Settings>
<Receive/Forward> <Common Settings>
1111
TX/RX User Data List(P. 1234)
Fax User Data List(P. 1235)
4XR3-0KJ