<Confirm Network Connection Setting Changes>(P. 1052)
Check the network connection. (Main Line)
The machine and the LAN cable of the main line are not connected correctly.
●
Check whether the LAN cable is connected correctly. If you had to connect it again, restart the machine.
Connecting to a Wired LAN(P. 27)
The machine is not connected to the network.
●
If you want to use the machine without connecting to a network, set <Confirm Network Connection
Setting Changes> to <Off>.
<Confirm Network Connection Setting Changes>(P. 1052)
Check the network connection. (Sub Line)
The machine and the LAN cable of the sub line are not connected correctly.
●
Check whether the LAN cable is connected correctly. If you had to connect it again, restart the machine.
Front Side(P. 92)
The machine is not connected to the network.
●
If you want to use the machine without connecting to a network, set <Confirm Network Connection
Setting Changes> to <Off>.
<Confirm Network Connection Setting Changes>(P. 1052)
The hard disk needs to be replaced. (Call service representative.)
The hard disk has failed. Alternatively, a hard disk is not installed.
●
Contact your local authorized Canon dealer.
●
If the optional Removable HDD Kit is installed, check the hard disk.
Eco (Staple-Free) is currently unavailable.
The eco (staple-free) staple unit is damaged.
●
Contact your local authorized Canon dealer.
The job was canceled because features that cannot be used at the same time as Eco
(Staple-Free) are set. Change the settings, then try again. Changing the staple position
or paper type may allow Eco (Staple-Free) to be used.
The staple position may be restricted depending on the paper type.
●
Set the staple position to <Top Left> or <Bottom Right>.
●
Change the paper type.
Check the punch waste tray.
The punch waste container of the optional equipment is full.
●
Empty the waste in the punch waste container.
Emptying the Punch Waste (Optional)(P. 1186)
Troubleshooting
1291