Canon imageRUNNER ADVANCE C5560i III User Manual page 1329

◼
#410
Storing cannot be performed because there are too many jobs waiting to be stored.
● Perform the operation again when the other jobs are complete.
◼
#411
The file are already locked by the other operations.
● Wait a while, and perform the operation again.
◼
#701
The Department ID does not exist, or the PIN was changed.
● If you are using User Authentication, assign Department IDs to users. If you are using DepartmentID
Authentication, enter the new Department ID and PIN to log in again.
The reception setting in <Allow Printer Jobs with Unknown IDs> or <Allow Remote Scan Jobs with
Unknown IDs> is set to <Off>.
● Set <Allow Printer Jobs with Unknown IDs> and <Allow Remote Scan Jobs with Unknown IDs> in
<Department ID Management> to <On>.
Setting the Department ID Management(P. 712)
Sending could not be performed because the remote fax client machine failed authentication to the
remote fax server machine.
● If Department ID Management is set in the remote fax server machine, log in to the remote fax client
machine using the Department ID and PIN set in the remote fax server machine.
◼
#702
Sending could not be performed because the memory was full.
● Wait a while. Try sending again after the other sending is complete.
◼
#703
An error occurred while converting the image.
● Lower the resolution, and then send the document again.
Could not write because the image area of the memory is full.
● Try sending again after the other sending is complete.
● Delete unnecessary files in the Mail Box and Fax/I-Fax Inbox. If there is still a problem, restart the machine.
Turning ON the Machine(P. 106)
◼
#704
An unknown error occurred when retrieving destination information from the address book.
● Check the destination settings. If there is still a problem, restart the machine.
Turning ON the Machine(P. 106)
Troubleshooting
1315