Canon imageRUNNER ADVANCE C5560i III User Manual page 1063

<Restrict Auto Reset Time>
<Preferences> <Timer/Energy Settings>
If you set this function to <On>, general users become unable to set <Auto Reset Time> and <Function After
Auto Reset>.
<Function After Auto Reset>
<Preferences> <Timer/Energy Settings>
You can set whether the default screen set for <Default Screen after Startup/Restoration> in <Preferences> or
the immediately previous screen is displayed at startup after the Auto Reset initiates.
● If Visual Message is set to be displayed after the Auto Reset mode initiates, the Visual Message screen
is displayed first, regardless of this setting.
<Auto Sleep Time>
<Preferences> <Timer/Energy Settings>
You can set the time until the machine automatically enters the Sleep mode if no operations are performed.
● It is recommended that the default value is used for this setting.
<Sleep Mode Energy Use>
<Preferences> <Timer/Energy Settings>
You can set the amount of energy that the machine consumes when it is in the Sleep mode.
● If the machine is connected to a computer using a USB cable, depending on the timing for entering
the sleep mode, the machine may be unable to receive data correctly. Reactivate the machine from
the sleep mode, then execute the job again.
● The energy consumption level may be the same as when <High> is set even when <Low> is set,
depending on the status of the machine.
● When performing wireless communication while <Sleep Mode Energy Use> is set to <Low>, and
<Wireless LAN Settings> or <Use Bluetooth> is enabled, <Compensate for Network Comm.> changes
to <On>.
Settings/Registration
Configuring the Visual Message Function(P. 857)
1049