Canon imageRUNNER ADVANCE C5560i III User Manual page 1288

Replace the waste toner container.
Cannot print because the waste toner container is full.
● Replace the waste toner container.
Replacing the Waste Toner Container(P. 1170)
Cannot recall the settings because the function for the button does not exist.
A personal button or shared button that includes a function not supported by the machine was used.
● If you have imported personal buttons/shared buttons registered in another imageRUNNER ADVANCE
series device, buttons not supported by the machine may be included. Register the personal buttons/
shared buttons again in the machine.
Cannot recall the settings because the function for the button is disabled. Enable the
function, then try again.
The operation could not be executed by pressing the button because the function to use has been
stopped.
● Press the button after enabling the function that was stopped to be used.
Synchronize Custom Settings: Log in again for synchronization.
There is an inconsistency between the synchronization data of the server machine and that of the client
machine synchronizing custom settings.
● Log out, and then log in again.
Synchronize Custom Settings: Some settings are restricted.
The client machine was synchronizing custom settings, but the server machine is turned OFF or is not
operating normally.
● Turn the server machine ON.
● If the server machine is operating normally, check that its network cable is connected before checking the
network settings.
Synchronize Custom Settings: An error occurred.
An error occurred during synchronization startup.
● Confirm that the address of the destination server is correct for the synchronization of custom settings
(client).
● If the synchronization of custom settings (client) is complete, restart synchronization.
● Restart the machine.
Troubleshooting
1274