Fax TX Report
You can configure the machine to automatically print the report each time a fax is sent. You can also configure
the setting to print the report only when an error occurs.
<Function Settings>
●
A Fax Multi TX Report is printed when <Fax TX Report> is set to <On> and broadcast transmission is
performed.
●
Even if you set <Report with TX Image> to <On> in the report settings, the image of the sent original
does not appear in a report when a fax is directly sent to the destination using direct sending (
Checking the Connection to the Recipient Before Sending (Direct Send)(P. 413) ) or manual
sending (
Sending Faxes Manually (Manual Sending)(P. 415) ).
●
If unnecessary streaks or shadows appear around the sent document, use <Erase Original Frame>.
Erasing Dark Borders When Scanning (Erase Frame)(P. 523)
●
If <TX Report> is set to <For Error Only> or <On>, a TX Report is printed with the Fax TX Report.
Fax RX Report
You can set a Fax RX Report to print automatically every time a fax is received. It is also possible to set the
report to print only when an error occurs.
<Function Settings>
report
<OK>
Confidential Fax Inbox RX Report
You can configure the machine to automatically print the report when a received fax is saved in the Confidential
Fax Inbox. You can also configure the setting so that the report is not printed.
<Function Settings>
Report>
Set the report
●
Even though <Off> is set in this setting, if
when a fax is saved in the Confidential Fax Inbox.
Printer Report
You can print a report of printer functions, such as the font list and status.
Maintenance
<Send>
<Fax Settings>
<Receive/Forward>
<Fax Settings>
<Receive/Forward>
<Fax Settings>
<OK>
Fax RX Report(P. 1233) is enabled, a report is printed
1233
<Fax TX Report>
Set the report
<Fax RX Report>
<Confidential Fax Inbox RX
<OK>
Set the