Canon imageRUNNER ADVANCE C5560i III User Manual page 1118

Hide thumbs Also See for imageRUNNER ADVANCE C5560i III:

Table of Contents

You can select whether to allow users to change the setting of <Send via Server> when sending I-faxes.

For I-fax, if <Send via Server> is set to <Off>, there is no size limit on the data that is sent, even if you

enter the maximum data size for sending.

The machine receiving the I-fax can send an MDN (a notification e-mail for checking the sending result) to the IP

address of the sending machine without going through a mail server.

You can set to only allow sending to addresses in a specified domain when sending an e-mail or I-fax.

You can set to automatically display e-mail addresses registered in the Address Book or an LDAP server based

on the initial characters of an e-mail address entry.

E-mail addresses that are stored with an access number do not appear.

You can register frequently used domain names in advance to eliminate the need to enter a domain when

specifying an address because a domain name with @ is automatically appended. If you want to send to

"123@example.com", register the domain name "example.com". If you specify an address that already includes

a domain with this setting on, the domains in this setting are invalid.

Note the following when importing the Address Book to another device.

- Since this setting follows the settings of the device you are using, the domain may differ from that

assigned by the device. Check this setting before using it with another device.

- If you import addresses without domain information to a device that does not have this setting,

you may not be able to send because the addresses are invalid.

Settings/Registration

<E-Mail/I-Fax Settings>

<E-Mail/I-Fax Settings>

<E-Mail/I-Fax Settings>

<E-Mail/I-Fax Settings>

<E-Mail/I-Fax Settings>

Chapters

Table of Contents