Canon imageRUNNER ADVANCE C5560i III User Manual page 1298

Cannot connect to the selected server. Check the settings.
Could not connect to the IP address/port.
● Check whether the server address and port number in <Register LDAP Server> are correct.
Registering the LDAP Server(P. 57)
● Check whether the LDAP server is operating normally.
● If <Authentication Information> is set to <Use (Security Auth.)> for the LDAP server, check whether UDP
packets are blocked by the filter.
● Check whether the gateway address set in <TCP/IP Settings> is correct.
Setting an IPv4 Address(P. 37)
The setting item specified from Settings Menu cannot currently be used. Contact the
system manager.
The selected settings menu cannot be changed or is not available.
● Contact your system administrator.
The selected button may be unavailable. Contact the system manager.
The selected user does not exist.
● Log in as the administrator and register the button again.
"Administrator" has been disabled.
● Select a user with administrator privileges.
Could not send.
An error occurred in the WebDAV server or proxy server.
● Check the settings for the WebDAV server or proxy server.
The target file or directory does not allow access from outside.
● Check whether the WebDAV server settings are correct.
● Check whether the destination is correct.
Registering Destinations(P. 218)
Accessing the Advanced Box from a Computer(P. 577)
Access to the WebDAV server is busy.
● Try sending again after waiting a while.
Chunk divided sending was refused.
● Set <Use Divided Chunk Send for WebDAV TX> to <Off>.
<Use Divided Chunk Send for WebDAV TX>(P. 1097)
The data to send is too large.
● Reduce the size of the data and try sending again.
The specified URL (host name and folder path set as the destination) is too long.
● Check the full path to the HTTP server entered in <Host Name> and the path to the WebDAV folder
entered in <Folder Path> as the destination.
Registering Destinations(P. 218)
Troubleshooting
1284