Retrieving/Updating A Certificate From An Scep Server - Canon imageRUNNER ADVANCE C5560i III User Manual

Retrieving/Updating a Certificate from an SCEP Server

A request for issuing the certificate required for keys generated with the machine can be sent to an SCEP (Simple
Certificate Enrollment Protocol) server that manages certificates. Certificates issued from the SCEP server are
automatically registered to the machine. Administrator privileges are required to send a request for issuing a
certificate.
Specifying the Communication Settings of the SCEP Server(P. 810)
Requesting a Certificate to Be Issued(P. 811)
Requesting a Certificate to Be Issued at the Specified Time(P. 812)
Checking the Status of Requesting a Certificate to Be Issued(P. 814)
Specifying the Communication Settings of the SCEP Server
You can specify the settings for communicating with the SCEP server.
1
Start the Remote UI.
2
Click [Settings/Registration] on the portal page.
3
Click [Device Management]
4
Click [Communication Settings].
5
Set the required communication settings.
[SCEP Server URL:]
Specify the URL of the SCEP server to connect to.
[Port Number:]
Enter the port number to use for communicating with the SCEP server.
[Communication Timeout:]
Enter the timeout time for communication with the SCEP server. The connection is canceled if there is no
response from the SCEP server within the set time.
Managing the Machine
Starting the Remote UI(P. 784)
[Settings for Certificate Issuance Request (SCEP)].
810
Remote UI Screen(P. 785)
4XR3-0F2