Canon imageRUNNER ADVANCE C5560i III User Manual page 1097

Hide thumbs Also See for imageRUNNER ADVANCE C5560i III:
Table of Contents

Advertisement

<Adjust TL Code>
<Function Settings>
You can adjust the density of the TL code to be embedded in the document.
Copying(P. 774)
<QR Code Print Position>
<Function Settings>
You can specify the position of a QR code.
<Quickly Exit Sleep Mode for Print Job>
<Function Settings>
If you perform LPD/RAW printing while the machine is in sleep mode, it may take some time to start printing. If
this setting is set to <On>, this time can be reduced.
<Auto Delete Suspended Jobs>
<Function Settings>
If this setting is set to <On> and a job is suspended due to a paper jam, etc., the machine automatically deletes
the job after the specified time period.
To retain a suspended job without automatically deleting it, see
Timeout>(P. 1077) .
<Feeder Jam Recovery Method>
<Function Settings>
You can select whether scanning will start again from the first page of the original or the page of the original in
which scanning was interrupted if a paper jam occurs in the feeder.
Direct sending of faxes does not support this setting. If a paper jam occurs while performing direct
sending, the job will be canceled. In this case, set the job again.
Depending on the location of a paper jam, it can be difficult to determine whether document
scanning has been completed. If you have set <From Suspnd. Original> for <Feeder Jam Recovery
Method> and you do not find until which page the document has been scanned, it is recommended
that you cancel the job, and then execute it again.
Select one of the following.
- <From 1st Page>: Place the originals in the feeder again, and then restart scanning from the first
page of the document. The originals will be fed automatically until the page of the document in
which scanning is interrupted.
Settings/Registration
<Common>
<Print Settings>
<Common>
<Print Settings>
Using QR Code to Restrict Copying(P. 776)
<Common>
<Print Settings>
<Common>
<Print Settings>
<Common>
<Scan Settings>
1083
<Secure Watermark/Document Scan Lock>
Using TL Code to Restrict
<Secure Watermark/Document Scan Lock>
<Suspended Job

Advertisement

Table of Contents
loading

Table of Contents