Canon imageRUNNER ADVANCE C5560i III User Manual page 1064

Hide thumbs Also See for imageRUNNER ADVANCE C5560i III:

Table of Contents

If the energy consumption level is set to <Low>, communication failure may occur, depending on the

network utility software you are using. To avoid this, press the Energy Saver key to cancel the Sleep

mode before using the machine.

You can set the time that the machine automatically enters the Sleep mode each day of the week.

If you set both the <Auto Sleep Time> and <Auto Sleep Weekly Timer>, the <Auto Sleep Time> setting

is given priority.

You can automatically perform the automatic gradation adjustment at a set time every day.

You can set the time for recovering from the Sleep mode.

When you cancel sleep mode and start the operation, you can activate necessary functions sequentially. The

control panel is activated first, followed by other functions activated in response to the user's operations. You

can save energy and lower noise by not activating unnecessary functions.

When the motion sensor detects a person near the machine, the machine exits the Sleep mode automatically.

You can adjust the accuracy for detecting people by changing the sensor sensitivity.

The following four sensitivity settings are available for <Sensor Sensitivity>. When a user stays in the

detection area longer than a certain period of time, the machine exits the Sleep mode.

Sensitivity Setting

Slightly High

Settings/Registration

With this sensitivity level, the machine does not recover even if someone passes by slowly.

With this sensitivity level, the machine does not recover even if someone passes by at a

regular speed.

With this sensitivity level, the recovery speed is prioritized more than the "Standard" level.

With this sensitivity level, the recovery speed is given top priority.

Sensitivity Level

Chapters

Table of Contents