Canon imageRUNNER ADVANCE C5560i III User Manual page 1108

<Envelope Flap Length Settings>
<Function Settings>
You can set the flap length when Nagagata 3 envelopes are loaded vertically (with the flap on the far side) in the
multi-purpose tray.
● In order to change this setting,
must be set to <On>.
● This setting is applied in the following cases:
- If Nagagata 3 envelope is specified in the printer driver
- If the multi-purpose tray is set as the paper source when sending the job from the printer driver
- If <Prioritize Printer Driver Settings for Jobs with MP Tray> is set to <On>
<PS Password Settings>
<Function Settings>
You can specify the password that restricts the use of the control command prepared by the PS printer.
● <SystemParamsPassword> is a password that allows changes to the system parameter, and
<StartJobPassword> is a password that allows startjob, exitserver operator to perform. For more
information, check PostScript language specifications.
<Paper Feed Mode When Using PCL Emulation>
<Function Settings>
You can set the paper source used for the PCL5 PaperSource command.
● For details on each setting, see Setting the Machine (PS/PCL/UFR II Printer).
Settings/Registration
<Printer>
<Paper Feed Mode for Printer Driver Jobs with MP Tray>(P. 1093)
<Printer>
<Printer>
1094