Changing Login Services - Canon imageRUNNER ADVANCE C5560i III User Manual

Changing Login Services

The application to implement user authentication is called the "Login Service." The machine is set to use "User
Authentication (personal authentication management)" for the login service by default. If you want to use
"DepartmentID Authentication," change the login service in the SMS.
Changing the Login Service(P. 1450)
Setting When Using DepartmentID Authentication(P. 1451)
Changing the Login Service
1
Log in to the Remote UI.
2
Click [Service Management Service] on the portal page.
3
Click [System Application Management]
Authentication)].
➠
The status becomes [Started].
4
Click [Enhanced System Application Management]
Authentication].
➠
The status becomes [Start after Restart].
5
Restart the machine.
➠
The machine restarts and the changed settings are reflected.
When DepartmentID Authentication is started
● If you click [Service Management Service] on the portal page of the Remote UI, the login screen to the
SMS is displayed. For security purposes, the machine is configured not to permit login with the
default password dedicated for the SMS. Press
Settings>
of Default Password for Remote Access> to <On>.
● After logging in to the SMS with the default password, restore the original security level by changing
the default password and then resetting <Allow Use of Default Password for Remote Access> to <Off>.
● "MeapSmsLogin" is set as the login password dedicated for the SMS. If you log in with
"MeapSmsLogin," the screen for changing the password is displayed. For security purposes, follow
the on-screen instructions to change the password.
● The password for the SMS can be changed with [Change Password] in [System Management].
● Make sure that you do not forget your password. Otherwise, you will not be able to access SMS. In
this case, contact your local authorized Canon dealer.
Starting the Remote UI(P. 784)
Restarting the Machine(P. 793)
<Authentication/Password Settings>
Appendix
[Start] in [SMS Installer Service (Password
[Switch] in [DepartmentID
<Management Settings>
<Password Settings>
1450
4XR3-0UR
<Security
temporally set <Allow Use