Canon imageRUNNER ADVANCE C5560i III User Manual page 1302

● Reinsert the toner cartridge. Make sure to check the status of the inserted container, which is displayed in
the area within the frame. For instructions on checking the model number of the toner cartridge, see
Consumables(P. 1192) .
To continue using the toner cartridge, press <Close> or <I Agree>. If you select this option, the operation
of the machine is not guaranteed.
To replace the toner cartridge, press <Cancel>.
If you are not sure about the remedies, contact your local authorized Canon dealer from which you
purchased the toner cartridge.
Cleaning the drum... Wait a moment.
The machine is cleaning the drum.
● Printing will automatically resume when the adjustment is complete. Wait a while.
Load staples into the saddle stitch unit.
The staple case in the saddle stitcher unit of the optional equipment has run out of staples.
● Replace the staple case of the saddle stitcher unit.
Loading Staples (Optional)(P. 1176)
The entered PIN is incorrect.
An incorrect PIN was entered.
● Enter the PIN again.
● If you do not know the correct PIN, contact the administrator.
The authentication server is not running. Contact the system manager.
The LAN cable is disconnected.
● Connect the LAN cable.
The Active Directory server is not running.
● Start the Active Directory server.
The KDC service of Active Directory is stopped.
● Follow the procedure below to check the status of the service.
1 Start the "Service" management tool of Active Directory.
2 Check whether the Active Directory server is operating normally.
Communication with the Active Directory
● Stop blocking the default port 88.
* If Active Directory is set as the login destination, communication is normally performed with the UDP protocol using port 88, but
the data may be processed with the TCP protocol if it exceeds a certain size.
Troubleshooting
* server is blocked by the firewall.
1288