Canon imageRUNNER ADVANCE C5560i III User Manual page 1062

● Wi-Fi
● Bluetooth
- When turning ON the main power of the machine after turning OFF the main power in any of the
conditions below
● More than 110 hours have elapsed after quick startup
● Operating jobs
● Jobs are reserved
● Just after using telephone lines
● Backing up data
● Accessing to the machine via network
● After specifying settings which require restarting the machine
● Error is occurred
● Using the Limited Functions mode
● The power cord is disconnected after turning OFF the main power
● MEAP applications which do not support quick startup are installed on the machine
- When turning ON the main power of the machine in 20 seconds after turning OFF the main power
- When turning ON the main power of the machine after eight hours have passed since the machine
was turned OFF
- When turning ON the main power of the machine after turning OFF the main power from the
Remote UI
<Auto Reset Time>
<Preferences> <Timer/Energy Settings>
You can specify the time period in which you are logged out and the touch panel display returns to the default
setting automatically.
● If the login service is being used, the machine automatically logs out the user when the Auto Reset
Time elapses.
● The screen displayed after the Auto Reset initiates differs depending on the following settings.
- Setting 1: The settings in [Visual Message Settings] (when [When to Display] is set to [After Logout/
Auto Reset])
● When Visual Message is not set or after the displayed Visual Message screen is closed, the screen
that is specified in Setting 2 is displayed.
- Setting 2: The settings in <Function After Auto Reset>
● When <Initial Function> is set, the screen specified in <Default Screen after Startup/Restoration>
(Setting 3) is displayed.
● When <Selected Function> is set, the function before the Auto Reset initiates is displayed. (The
specified settings and entered values for each function will be cleared.) However, the <Selected
Function> settings may not be correctly reflected, and the screen specified in <Default Screen after
Startup/Restoration> may be displayed.
- Setting 3: The settings in <Default Screen after Startup/Restoration>
Settings/Registration
1048