Canon imageRUNNER ADVANCE C5560i III User Manual page 1061

<Timer/Energy Settings>
This section describes the timer settings and energy settings.
<Adjust Time>
<Preferences>
You can adjust the time in minutes.
● Even if you change the time from 23:59 to 00:00, the date will not be changed.
Date/Time Settings
<Preferences>
Setting the current date and time is very important. For instructions on how to configure the setting, see
Setting the Date/Time(P. 19) .
<Time Format>
<Preferences>
You can set whether to display the time in 24-hour notation or 12-hour notation.
● You can also specify to automatically synchronize the date and time with a server on the network
using SNTP.
<Quick Startup Settings for Main Power>
<Preferences >
If you set this function to <On>, you can reduce the time it takes until you can perform operations on the screen
and scan originals after the power is turned ON.
● When this function is enabled
- Standby power is consumed even when the power is turned OFF.
- A tone sounds when the machine is turned ON, or when the machine is turned OFF if you set <Sleep
Mode Tone> in <Other Volume Settings> to <On>. (However, the machine may not be able to start
up quickly and the tone may not sound, depending on the status of the machine.)
● Even if this function is set to 'On', the machine does not startup quickly in the following situations:
- When any of the network settings below are set to 'On'
● AppleTalk
Settings/Registration
<Timer/Energy Settings>
<Timer/Energy Settings>
<Timer/Energy Settings>
Making SNTP Settings(P. 67)
<Timer/Energy Settings>
1047
4XR3-0K2