Canon imageRUNNER ADVANCE C5560i III User Manual page 1176

Wipe the document feed scanning area (the thin and long glass area).
● Wet a soft cloth with water and wring it out well, then wipe the machine with it. Afterwards,
wipe the machine with a soft and dry cloth.
● Wait until the moisture has completely dried before proceeding to the next step.
Close the inner cover.
Close the document feed scanning area cover until it clicks into place.
8
Gently close the feeder.
9
Insert the power plug into the power outlet, and turn the power ON.
Turning ON the Machine(P. 106)
If streaks still appear on the originals or paper after the feeder cleaning operation
● Load about 10 sheets of A4 size paper in the feeder and perform the following procedure to execute
<Clean Feeder>(P. 1074) . When a message indicating that cleaning is complete is displayed, try
using the feeder to copy an original to check if the problem has been resolved.
● It takes approximately 20 seconds to clean the feeder.
Maintenance
1162