Canon imageRUNNER ADVANCE C5560i III User Manual page 1091

Hide thumbs Also See for imageRUNNER ADVANCE C5560i III:

Table of Contents

<Print Side Priority> is only enabled when paper that can be printed on both sides is set (

Available for Two-Sided Copying/Two-Sided Printing(P. 1497) ). For other paper, the message

<Load paper.> appears and the paper is not fed, or the <Print Side Priority> setting is disabled.

For instructions on loading paper, see

If this setting is set to <On> and a job is suspended due to a lack of paper, etc., the machine automatically prints

the next job after the specified time period.

If a job is suspended because paper has run out during the job, the next job is not processed even

after the designated suspension time elapses.

To automatically delete suspended jobs, see

You can set the tray to output to for each function.

Paper(P. 184)

This enables you to shift the output for each job when multiple jobs are printed consecutively.

This enables you to insert the specified paper at the start of each job when multiple jobs are printed

consecutively.

This enables you to insert the specified paper each number of copy sets to divide the sets. If you set this, paper

is inserted when printing with Collate (Page Order), Offset, or Staple.

You cannot insert job separation sheets between copy sets in the following cases:

If you are using the Group, Booklet, Saddle Stitch, or Fold mode, or if you are using tab paper

Settings/Registration

Loading Preprinted Paper(P. 132) .

<Auto Delete Suspended Jobs>(P. 1083) .

Specifying the Output Tray for Preprinted

Chapters

Table of Contents