Fitting The Anti-Tilt Bracket - Fujitsu PRIMERGY TX150 S5 Operating Manual

Hardware Installation
4.3.1

Fitting the Anti-Tilt Bracket

I
For safety reasons (risk of tipping), the anti-tilt bracket must be fitted on
the rear of the server on floorstand models with hot plug power supply
units.
Figure 3: Fitting the Anti-Tilt Bracket
Ê Position the server on the anti-tilt bracket in such a way that the rubber feet
fit into the openings in the bracket (1).
TX150 S5
Setting up the floorstand model
Operating Manual 35