Removing An M.2 Ssd - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

14.6.3

Removing an M.2 SSD

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH1 / (+) No. 1 screw driver
– Hexagon screw driver (for moving the screw to another hexagon
stand-off)
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the system fan module, see
page 82.
▶ If applicable, remove the SAS expander board holder without disconnecting
cables, see "Removing the SAS expander board holder" on page
Position the SAS expander board holder on the HDD cages to get more
space.
▶ If applicable,
"Removing an expansion card" on page
Removing the M.2 SSD
Figure 288: Removing the M.2 SSD (A)
TX1330 M4
47.
"Removing the system fan module" on
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
48.
50.
305.
273.
437