Installing The Tpm; Preliminary Steps - Fujitsu PRIMERGY TX1310 M3 Upgrade And Maintenance Manual

System board and components

15.3.1 Installing the TPM

Field Replaceable Unit
(FRU)
Tools: – Bit screw driver
– TPM bit insert
( )
* For Japan
– TPM module fixing tool (S26361-F3552-L909)

15.3.1.1 Preliminary steps

"Shutting down the server" on page 44
Ê
"Disconnecting the power cord" on page 45
Ê
"Getting access to the component" on page 46
Ê
Ê Remove all expansion cards, see section
page 116.
I
Before removing the expansion cards, take a note on the installation
slot number for each card. Make sure that you reinstall the card in the
slot it was located before the replacement.
15.3.1.2 Installing the TPM
Figure 114: Inserting the TPM spacer on the system board
Ê Insert the TPM spacer into the hole on the system board.
186
( )
*
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 5 minutes
"Removing expansion cards" on
TX1310 M3