Ultraslim Odd In 3.5-Inch Hdd Extension Box; Installing The Ultraslim Odd - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Accessible drives
▶ If applicable,
"Verifying and configuring the backup software solution" on
page 102.
12.7 Ultraslim ODD in 3.5-inch HDD extension
box
12.7.1

Installing the ultraslim ODD

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver (for bending in or out accessible drive
mounting brackets)
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
The front cover only needs to be removed in order to remove
accessible drive dummy covers. If the HDD extension box is already
installed in the server and will be removed in order to install an
ultraslim ODD, skip this step.
▶ If applicable,
"Removing the 4x 3.5-inch HDD extension box" on page
384
47.
Upgrade and Maintenance Manual
Hardware: 10 minutes
48.
50.
260.
TX1330 M4