Replacing An Fbu - Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

9.6.4

Replacing an FBU

Upgrade and Repair Unit
(URU)
Tools: tool-less
CAUTION
▶
Dispose of used battery properly. Keep away from children.
▶
Do not throw flash backup units into the trash can. Batteries must
be disposed of in accordance with local regulations concerning
special waste.
Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
Removing the defective FBU
▶ Remove the FBU with the holder, see
on page 228.
▶ Disconnect the FBU cable from the FBU, see
from the FBU" on page
▶ Remove the FBU from the holder, see
on page 230.
Installing the new FBU
▶ Install the FBU in the FBU holder and connect the FBU cable to the FBU,
see "Preparing the FBU" on page
▶ Install the FBU with the FBU holder, see
RX1330 M4
Expansion cards and backup units
45.
"Removing the FBU with the holder"
229.
"Removing the FBU from the holder"
220.
Upgrade and Maintenance Manual
Hardware: 15 minutes
43.
46.
48.
"Disconnecting the FBU cable
"Installing the FBU" on page 223.
231