Removing A Slot Bracket - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

Expansion cards and backup units
Figure 131: Mounting the PCI slot bracket (B)
Ê Secure the slot bracket to the controller with the two M3 x 5 mm screws
contained in the expansion card kit.
9.2.2

Removing a slot bracket

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
Removing the slot bracket
Ê Remove the two screws.
Ê Remove the controller from the mounting tabs on the slot bracket.
204 Upgrade and Maintenance Manual
Hardware: 5 minutes
TX150 S8 / TX200 S7