Removing The Sas Expander Board - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

For more information about connecting SAS cables to the corresponding
controller see
For the cable plan, see
Concluding steps
▶ Install the fan bridge, see
▶
"Installing the system air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ Update the system information of your server using the Chassis ID Prom
Tool, see "Using the Chassis ID Prom Tool" on page
corresponding system name.
▶
"Resuming BitLocker functionality" on page
7.9.2

Removing the SAS expander board

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
After installing or removing the extension box, never forget to change
the system information using the Chassis ID Prom Tool.
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
TX2550 M5
Hard disk drive (HDD) / solid state disk (SSD)
"Expansion cards and backup units" on page
"Appendix B" on page
"Handling the fan bridge" on page
68.
83.
Upgrade and Maintenance Manual
589.
68.
82.
136. Select the
130.
Hardware: 10 minutes
Software: 10 minutes
107.
49.
50.
323.
92.
311