Setting The Deck - Canon imageRUNNER ADVANCE 8105 Series Service Manual

<Cleaning Tool>
Store in an empty space at front side of the Cassette 3 to use for maintenance.
<Connection Seal>
Affix the Connection Seal (Front) and the Connection Seal (Middle) to the position on the left
side of the Main Body as shown in the figure.
CAUTION:
Be sure that there is no gap between the Connection Seal (Front) and the Connection
Seal (Middle).
Connection Seal (Middle)
9
Installation > Installation > Setting the Deck
F-9-63 F-9-63
[A]
Connection Seal (Front)
F-9-64 F-9-64
9
Installation > Installation > Setting the Deck

Setting the Deck

1) Push the Deck Release Button to pull out the Left and the Right Decks to the front.
2) Remove the 3 screws fixing the Trailing Edge Guide Plate, Left Guide Plate, and Right
Guide Plate in place, and fix each of the guide plates at user's desired size.
MEMO:
Setting at the time of shipment: A4 size
x3
Trail Edge
Guide Plate
Right
Guide Plate
9-30
Left
Guide Plate
Screw
F-9-65 F-9-65
9-30