8) Insert the HDD Drawer Unit into the hole on the HDD Case Unit to install it.
•
2 Screws (TP Round End; M3x6)
9) Close the Edge Saddle.
x2
9
Installation > [TYPE-10] Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the Encryption Board and
■
Installing the Encryption Board and HDD Case Unit
MEMO:
The following shows combination of the HDD and the Encryption Board.
•
•
Edge Saddle
F-9-563
1) Connect the Signal Cable and the Power Cable of the host machine to the Encryption
Board.
9
Installation > [TYPE-10] Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the Encryption Board and
Connect "CH A" to Slot.1 (The original HDD)
No HDD to Slot.2
B
C H
A
C H
x2
9-281
Power Supply Cable
Signal Cable
Signal Cable
Power Supply Cable
F-9-564
F-9-565
9-281