Canon imageRUNNER ADVANCE 8105 Series Service Manual page 692

E Detail
Location Item
Code Code
E732 -0001 -00 Title Reader communication error
Remedy 1. Check the connection of the Connector with the Reader.
2. Check the power of the Reader (check if the initialization
operation is executed at startup).
3. Replace the Reader Controller PCB and the Main
Controller PCB.
Description Communication error.
E732 -0010 -00 Title Reader communication error
Remedy 1. Check the connection of the Connector with the Reader.
2. Check the power of the Reader (check if the initialization
operation is executed at startup).
3. Replace the Reader Controller PCB and the Main
Controller PCB.
Description Unable to detect Vsync from the Reader Controller although
2 minutes have passed after the completion of register setting
of the Main Controller.
E732 -9999 -00 Title Detection of Reader
Remedy ---
Description The Reader is detected for the first time with the printer
model. (On the user screen, only the message"Turn OFF
and then ON the power again", instead of an error code, is
displayed. It is recorded as an error log in Service Mode >
DISPLAY > ERR.)
E733 -0000 -00 Title Printer communication error
Remedy 1. Check the connection of the Connector with the printer.
2. Check the power of the printer (check if the initialization
operation is executed at startup).
3. Replace the DC Controller or the Main Controller PCB.
Description Unable to communicate with printer at startup.
E733 -0001 -00 Title Printer communication error
Remedy 1. Check the connection of the Connector with the printer.
2. Check the power of the printer (check if the initialization
operation is executed at startup).
3. Replace the DC Controller or the Main Controller PCB.
Description Communication error between the Main Controller and the
DC Controller.
E733 -0002 -00 Title Printer communication error
Remedy 1. Check the connection of the Connector with the printer.
2. Check the power of the printer (check if the initialization
operation is executed at startup).
3. Replace the DC Controller or the Main Controller PCB.
Description Communication error between the Main Controller and the
DC Controller.
7
Error Code > Error Code > Error Code Details > E710 to E753
Description
7
Error Code > Error Code > Error Code Details > E710 to E753
E Detail
Location Item
Code Code
E733 -0010 -00 Title Printer communication error
Remedy 1. Check the connection of the Connector with the printer.
2. Check the power of the printer (check if the initialization
operation is executed at startup).
3. Replace the DC Controller or the Main Controller PCB.
Description Error to detect printer vertical synchronous signal.
E740 -0002 -00 Title Network Controller error
Remedy 1. Check the connection of the LAN Connector.
2. Check the connection of the Main Controller PCB 1.
3. Replacement of the Main Controller PCB 1.
Description Invalid MAC address.
E743 -0000 -04 Title DDI communication error
Remedy 1. Connection error between the Main Controller PCB and the
Reader Controller PCB.
2. Failure of the Reader Controller PCB (PCB1).
3. Failure of the Main Controller PCB.
Description The Reader Controller PCB detected the communication error
between the Main Controller PCB and the Reader Controller
PCB.
E743 -0003 -04 Title DDI communication error
Remedy 1. Connection error between the Main Controller PCB and the
Reader Controller PCB.
2. Failure of the Reader Controller PCB (PCB1).
3. Failure of the Main Controller PCB.
Description The Reader Controller PCB detected the communication error
between the Main Controller PCB and the Reader Controller
PCB.
E743 -0004 -04 Title DDI communication error
Remedy 1. Connection error between the Main Controller PCB and the
Reader Controller PCB.
2. Failure of the Reader Controller PCB (PCB1).
3. Failure of the Main Controller PCB.
Description The Reader Controller PCB detected the communication error
between the Main Controller PCB and the Reader Controller
PCB.
Error in language file/BootROM
E744 -0001 -00 Title
Download the correct version of the language file.
Remedy
Description Version of language in HDD and version of Bootable are
different.
Error in language file/BootROM
E744 -0002 -00 Title
Download the correct version of the language file.
Remedy
Description Size of the language in HDD is too big.
7-78
Description
7-78