11) Secure the Signal Cable and the Power Supply Cable in place using the 3 Wire Saddles.
x3
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Installing the Encryption Bo
12) Fold extra length of the Cable and secure it in place using the Wire Saddle.
CAUTION:
•
•
•
F-9-700
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Installing the Encryption Bo
Be sure that the cable is not in contact with the stepped screw [A of Drawer.
When securing the cable, be sure that it does not go over to the front.
When the FAX Board is installed, be sure to avoid contact of the cable with the PCB
to secure the cable.
[A]
CH B
9-342
CH A
F-9-701
9-342