Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1077

5) Install the HDD Cover.
• 1 Claw
•
1 Screw (TP Round End; M3x6)
CAUTION:
Be sure to use the round end screw included in the Removable HDD Kit as the TP
screw.
Claw
6) Install the HDD Handle.
• 2 Screws (TP Round End; M3x6)
CAUTION:
Be sure to use the round end screw included in the Removable HDD Kit as the TP
screw.
x2
9
Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Changing Configuration inside of HDD Case Unit
7) Affix the HDD No.1 Label to the handle of the Removable HDD.
8) Write down the serial number of the host machine to the label for recording the number,
■
F-9-256 F-9-256
1) Remove the E-ring from the removed HDD Case Unit, remove the shaft of the HDD Cap,
F-9-257 F-9-257
9 Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Changing Configuration inside of HDD Case Unit
and affix it to the area indicated in the figure.
Changing Configuration inside of HDD Case Unit
and then remove the HDD Fixed Plate. (The removed HDD Fixed Plate will not be used.)
HDD Fixed Plate
9-115
HDD No.
Serial No.
XXXXXXXX
F-9-258 F-9-258
F-9-259 F-9-259
9-115