Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1134

9) Connect the LED Cable (310mm; FM3-9158) to the LED Board and the Mirroring Board or
Encryption Board.
•
2 Connectors
•
6 Wire Saddles
CAUTION:
•
Secure the LED Cable in the direction of the arrow.
•
Check that the LED Cable is connected properly at the time of installation because
the machine can operate even when the cable is not connected properly.
x2
x6
9
Installation > [TYPE-5] 2 Option HDDs (250GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing th
10) Insert the assembled 2 Option HDDs.
F-9-362
9
Installation > [TYPE-5] 2 Option HDDs (250GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing th
Connector side
Slot.2 (HDD2)
Slot.1 (HDD1)
9-172
F-9-363
9-172