Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1138

16) Close the HDD Cap.
• 1 Screw
CAUTION:
•
Be sure that the cables do not protrude from the [A] part of the HDD Cap.
• If the cables protrude from the [A] part, allow extra slack of the cables at the [B] part
and tuck them to the host machine side.
9
Installation > [TYPE-5] 2 Option HDDs (250GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing th
17) Close the Controller Box.
CAUTION:
When closing the Controller Box, check that the LED Cable is not trapped or does not
contact with it.
[A] [B]
F-9-371
18) Install the Rear Upper Cover.
MEMO:
Be sure to install the 3 TP screws show in the figure below.
9
Installation > [TYPE-5] 2 Option HDDs (250GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing th
9-176
F-9-372
F-9-373
9-176