Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1195

6) Affix the HDD No.2 Label to the handle of the Removable HDD.
7) Write down the serial number of the host machine to the label for recording the number,
and affix it to the area indicated in the figure.
■ Changing Configuration inside of HDD Case Unit
1) Remove the E-ring from the removed HDD Case Unit, remove the shaft of the HDD Cap,
and then remove the HDD Fixed Plate. (The removed HDD Fixed Plate will not be used.)
HDD Fixed Plate
9
Installation > [TYPE-8] Option HDD (80GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Proce
HDD No.
Serial No.
XXXXXXXX
F-9-465
F-9-466
9 Installation > [TYPE-8] Option HDD (80GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Proce
2) Put the HDD Cap and the shaft back to the HDD Case Unit, and secure the HDD Case Unit
with the E-ring.
3) Remove the Face Plate. (The removed Face Plate will not be used.)
•
1 Screw
4) Remove the Upper Rail from the HDD Case Unit.
•
2 Screws (The removed screws will be used in step 7).)
x2
9-233
F-9-467
F-9-468
9-233