17) Secure the Signal Cable and the Power Supply Cable.
•
1 Edger Saddle
•
9 Wire Saddles
CAUTION:
•
Secure the cables so that there is no extra slack of the cables at [A] part.
•
Be sure that the Wire Saddle [B] is properly securing the cables.
•
When the FAX Board is installed, be sure to avoid contact of the cable with the PCB
to secure the cable.
[A]
x10
9
Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the M
[B]
F-9-333
9
Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the M
CAUTION:
If there is extra slack of the cables, be sure to tuck them to the host machine side.
CAUTION:
Check that the connector of the Signal Cable is connected properly and that the cable
is not overloaded.
9-154
F-9-334
F-9-335
9-154