5) Remove the Rear Upper Cover.
•
4 Screws (RS Tightening)
•
3 Screws (TP)
x7
6) Open the HDD Cap.
•
1 Screw
9
Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Removing the C
7) Turn the HDD Fixed Plate toward the front.
1 Screw (The removed screw will be used in "Installing the Mirroring Board or Encryption
•
Board" step 13).)
F-9-311
8) Remove the HDD.
•
2 Connectors
F-9-312
9
Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Removing the C
x2
9-146
F-9-313
F-9-314
9-146