Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1302

6) Connect the STS Cable (340mm (Light Blue); FM3-9152) to the Main Controller PCB 2 and
the Encryption Board.
•
2 Connectors
•
1 Edge Saddle
• 5 Wire Saddles
CAUTION:
Check that the STS Cable is connected properly at the time of installation because the
machine can operate even the cable is not connected.
Connector
x6
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Installing the Encryption Bo
7) Install the LED Board to the back of the HDD Case Unit.
• 2 Screws (TP; M3x6)
Connector
F-9-695
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Installing the Encryption Bo
9-340
x2
F-9-696
9-340