10) Remove the HDD Case Unit.
•
2 Screws (The removed screws will be used in "Installing the Encryption Board/HDD Case
Unit" step 3).)
x2
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Assembling the Removable
■
Assembling the Removable HDD
1) Disassemble the removed Fixed HDD.
•
4 Screws
•
1 HDD Grounding Plate
•
HDD Support Plate
F-9-674
MEMO:
Be sure to install the HDD Connector to the side with screw holes of the HDD Support
Plate (opposite direction to the Fixed HDD).
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Assembling the Removable
x4
TP
HDD Grounding Plate
Label
9-333
HDD
HDD Support Plat
F-9-675
Screw Hole
Connector
Screw Hole
F-9-676
9-333