Paper Deck Heater Unit-A1 - Canon imageRUNNER ADVANCE 8105 Series Service Manual

Paper Deck Heater Unit-A1

Checking the Contents
MEMO:
Every components of the paper deck heater unit (paper deck heater unit-A1)
are supplied as service parts, so have the following parts on hand.
[9]
[2]
[4]
[12]
[5]
[7]
[8]
[10]
[11]
No. Parts Name
[1] Heater Unit
[2] AC Input Connector
[3] Relay Harness Unit
[4] AC Cable
[5] Screw with Toothed Washer
[6] Cable Protection Bushing
[7] Power Supply Label
[8] Screw (Binding; M4x4)
[9] Screw (RS-tight; M4x8)
[10] Wire Saddle
[11] Cord Mount
[12] Screw with Flat Spring
9
Installation > Paper Deck Heater Unit-A1 > Check Items when Turning OFF the Main Power
[3]
[6]
[5]
[1]
[5]
F-9-129 F-9-129
Parts Number Q'ty
FG6-9651-000 1pc.
FK3-0631-000 1pc.
FG6-2957-000 1pc.
FG6-1117-000 1pc.
XB2-7400-607 3pcs.
WT2-5098-000
1pc.
FS6-8725-000
1pc.
XB1-2400-409 2pcs.
XA9-0732-000 2pcs.
WT2-5018-000 3pcs.
FC7-5473-000 1pc.
XB2-8401-007 1pc.
T-9-5 T-9-5
9
Installation > Paper Deck Heater Unit-A1 > Check Items when Turning OFF the Main Power
Check Items when Turning OFF the Main Power
Check that the main power switch is OFF.
1) Turn OFF the main power switch of the host machine.
2) Be sure that Control Panel Display and Main Power Lamp are both turned OFF, and then
disconnect the power plug.
CAUTION:
When installing the heater to the paper deck, take the following precautions.
a. The AC power plug of the host machine must have been removed from the outlet.
b. Install the heater after installing the host machine and paper deck.
c. Use correct screws (length and diameters) at correct positions.
9-58
9-58