Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1171

6) Fold extra length of the cable and secure it with the 2 Wire Saddles [A].
x2
7) Connect the STS Cable (340mm (Light Blue); FM3-9152) to the Main Controller PCB 2 and
the Encryption Board.
• 2 Connectors
•
1 Edge Saddle
•
5 Wire Saddles
CAUTION:
Check that the STS Cable is connected properly at the time of installation because the
machine can operate even when the cable is not connected properly.
x2
Connector
x6
9
Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
[A]
F-9-420
Connector
F-9-421
9
Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
8) Install the LED Board to the side surface of the HDD Case Unit.
• 2 Screws (TP; M3x6)
9-209
x2
F-9-422
9-209