Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1266

5) Install the HDD Lock Pin and the HDD Lock Spring to the removed rail.
6) Return the rail to its original position.
•
2 Bosses
•
2 Screws (Use the screws removed in step 3).)
Hole
Hole
x2
Boss
8) Insert the HDD Drawer Unit into the hole on the HDD Case Unit to install it.
•
2 Screws (TP Round End; M3x6)
9) Close the Edge Saddle.
x2
9
Installation > [TYPE-11] Option HDD (250GB) + Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing th
Boss
F-9-606
Edge Saddle
F-9-607
9
Installation > [TYPE-11] Option HDD (250GB) + Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing th
■
Installing the Encryption Board and HDD Case Unit
MEMO:
The following shows combination of the HDD and the Encryption Board.
•
Connect "CH A" to Slot.1 (The new HDD)
•
No HDD to Slot.2
C H
C H
Power Supply Cable
B
Signal Cable
A
Signal Cable
Power Supply Cable
F-9-608
9-304
9-304