Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1174

15) Secure the Signal Cable and the Power Supply Cable.
15-1) Secure the Signal Cable and the Power Supply Cable connected to CH A.
•
1 Edger Saddle
• 8 Wire Saddles
CAUTION:
•
Secure the cables so that there is no extra slack of the cables at [A] part.
• Be sure that the Wire Saddle [B] is properly securing the cables.
x9
9
Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
[A]
CH A
[B]
F-9-428
9
Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
15-2) Connect the Signal Cable (550mm; FK2-7827) and the Power Supply Cable
(570mm; FK2-7831) to CH B, and secure them in place using the 2 Wire Saddles [A].
15-3) Fold extra length of the cables and secure them in place using the 2 Wire Saddles
[B].
Power Supply Cable (570mm; FK2-7831)
x2
x4
9-212
Signal Cable
(550mm; FK2-7827)
CH B
[A]
[B]
F-9-429
9-212