Table Of Options Combination; Points To Note At Installation Work - Canon imageRUNNER ADVANCE 8105 Series Service Manual

•
The optional Booklet Finisher, Paper Folding Unit, Professional Puncher Integration Unit,
Professional Puncher, Document Insertion Unit, Duplex Color Image Reader Unit, and POD
Deck Lite are attached.
500 mm 3,639 mm
or more
3) To install the host machine, install it in a well-ventilated place. Especially when there are
multiple host machine s, be sure to locate the machine where the machine is free from
direct exhaust of other machines. Be sure to keep the machine away from the air-inlet duct
which is used for ventilation of the room.

Points to Note at Installation Work

Take note of the following points when installing the host machine.
1) Moving the host machine from a cool place to a warm place can generate condensation,
causing moisture beads on the metal surface. Using the host machine while the machine
is condensed can cause image failure. Therefore, when moving the machine from a cool
place to a warm place to install, unpack the host machine and leave it for 2 hours or more
before the installation work so that the machine becomes used to the room temperature.
2) Be sure to work with a group of 4 or more people to install the host machine.
9
Installation > Table of Options Combination
800 mm or more
500 mm
500 mm or more
or more
F-9-2 F-9-2
9
Installation > Table of Options Combination

Table of Options Combination

MEMO:
Following table shows the combination of options to be installed at the right side of the
host machine.
Refer to the table below to install the options described in the table. Be sure to check
the combination before the installation work.
Utility Tray-A1
Utility Tray-A1 -
Voice Guidance Kit -F1 No
Card Reader-C1 Yes
Yes: installation is available, No: installation is not available
Voice Guidance Kit -F1 Card Raeader -C1
No Yes
- Yes
Yes -
9-3
T-9-1 T-9-1
9-3