Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1284

10) Secure the HDD Fixed Plate.
<In the Case of 2 HDDs>
•
1 screw (Use the screws removed in "Removing the Covers" step 6).)
•
1 Screw (TP; M3x6) (Use the contents included in the Option HDD.)
x2
<In the Case of a single HDD>
•
1 screw (Use the screws removed in "Removing the Covers" step 6).)
9
Installation > HDD Data Encryption & Mirroring Kit-C2 > In the Case of Fixed HDD > Installing the Encryption Board
11) Connect the Signal Cable and the Power Supply Cable (included in the package) to the
HDD.
<In the Case of 2 HDDs>
11-1) Connect the Signal Cable (550mm; FK2-7827) and the Power Supply Cable
11-1) Connect the Signal Cable (550mm; FK2-7826) and the Power Supply Cable
MEMO:
When connecting the Signal Cables, the side labeled "HDD1" or "HDD2" should be
connected to the HDD.
F-9-650
<In the Case of a single HDD>
11-1) Connect the Signal Cable (550mm; FK2-7826) and the Power Supply Cable
F-9-651
9
Installation > HDD Data Encryption & Mirroring Kit-C2 > In the Case of Fixed HDD > Installing the Encryption Board
(570mm; FK2-7831) to Slot.2.
(570mm; FK2-7831) to Slot.1.
Signal Cable
(550mm; FK2-7827)
x4
Power Supply Cable
(570mm; FK2-7831)
(570mm; FK2-7831) to Slot.1.
9-322
Signal Cable
(550mm; FK2-7826)
Power Supply Cable
(570mm; FK2-7831)
F-9-652
9-322