Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1014

9) Put the harness along the claws of FFC guide in the 4 places.
MEMO:
Make sure to keep the harness tightly put.
Guide
x4
10) Open the 2 Edge Saddles, put the connector through a hole of the plate, and then secure in
place using the 2 Edge Saddles.
9
Installation > Reader Heater Unit > Installation Procedule
11) Release the wire saddle and connect the connector.
Guide
12) Secure the harness in place using the Wire Saddle.
F-9-113 F-9-113
edge
F-9-114 F-9-114
9
Installation > Reader Heater Unit > Installation Procedule
Wire saddle
sheet
9-52
Wire saddle
F-9-115 F-9-115
F-9-116 F-9-116
9-52